home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 13
/
QRZ Ham Radio Callsign Database - Volume 13.iso
/
modfiles
/
ic32.txt
< prev
next >
Wrap
Internet Message Format
|
1999-04-07
|
3KB
Date: 16 Mar 89 14:40:44 GMT
From: SV1IW@SV1IW
Subject: IC-32 Mod
Hello everybody, new radios are getting more and more complicated, don't
you agree?
Here is a modification for the new Handheld Icom xcver IC-32 which will make
it to act as a cross band repeater!
1. First take off the battery pack.
2. Remove the 4 screws from radio's back.
3. Remove two screws above and below the PTT and take the whole thing off
so the four microswitches are revealed.
4. Take carefully the radio apart by slightly pushing away the front cover.
5. Put the two pieces in front of you with the front part at your left and
the back at your right. Be carefull with the ribbon joining the two
pieces!!! Orientation is as usual with the place that the battery plugs
down and the top of radio (i.e. where the antenna goes) up.
6. Find some pads with diodes in the lower right of the left part (front) of
the radio below to the speaker.Take a look in the drawing below:
Top of the radio
[[-|>--[[ The number of diodes installed in the top 3 pads
[[-|>--[[ depends on the frequency coverage of the rig, maybe
[[ [[ two or all three.
_ZDDBD
@DDAD This is a small diode, by removing it the unit
will receive from 300-370 Mhz but this is an
untested mod!
[[-|>--[[ When you cut this one crossband repeater is enabled!
\
[[ \ [[ If you put this diode crossed and have full
frequency coverage not only you enable cross band
repeater but you can insert the frequency from the
keypad starting from second digit (without this mod
Bottom of the radio when you wish to insert a frequency in another
where battery plugs decade from the one you already are, you have to
go there manually).
Last but not least to enable cross band repeating first choose a pair of
frequencies with the two vfo's for VHF and UHF.Then press and hold function
key while pressing with the other hand the following "C" "6" "D". The radio
will start scanning the two frequencies continiously, if a station is heard
in one of the two it will retransmitted from the other! The two frequencies
must be simplex, no cross band repeaters yet sorry!
Next John? >
Copied from the QRZ! Windows Ham Radio CDROM